ORDER ONLINE PRICE LIST
Kubota Super UDT2 Universal Trans-Hydraulic Fluid Information
Kubota Super UDT2 is a multi-purpose all-weather hydraulic fluid.This product is specifically recommended for use in the Kubota hydraulic, final drive, transmission, differential, and wet brake systems.
- Kubota® Super UDT2 provides the following benefits to Kubota equipment:
- Kubota Super UDT2 Universal Trans-Hydraulic Fluid
- Improved transmission performance and protection at high and low operating temperatures
- Unique friction characteristics on wet clutches enables smoother start off, drive control, and PTO connection
- Fully interchangeable with standard UDT and Super UDT fluids
- Superior corrosion resistance and efficient filterability protects transmission and hydraulic systems
- Improved transmission efficiency through reduction in power loss
- Meets Kubota’s stringent specifications
For reliable, long lasting performance of your Kubota equipment, choose Kubota Genuine Products.
| Typical Properties | Super UDT2 Fluid |
|---|---|
| Gravity, degree API | 34.5 |
| Viscosity @ -40º C, cP | 16000 |
| Viscosity @ 100º C, cSt | 8.1 |
| Viscosity @ 40º C, cSt | 37 |
| Viscosity Index | 199 |
| Pour Point, ºC max | -42 |
| Zinc, % wt. | 0.1122 |
| Product Codes | Container Sizes Available |
|---|---|
| 70000-40200 | 12/1 Quart |
| 70000-40201 | 4/1 Gallon |
| 70000-40202 | 2/2.5 Gallon |
| 70000-40205 | 5 Gallon Pail |
| 70000-40255 | 55 Gallon Drum |
| 70000-40233 | 325 Gallon Tote |
Kubota UDT Fluid
Kubota UDT Fluid is a multi-purpose, all-weather tractor hydraulic fluid specifically recommended for the Kubota hydraulic, final drive, transmission, differential and wet brake systems of tractors. This product offers the following benefits to Kubota equipment:
- Improves efficiency in synchro- and glide shift transmissions
- Fully interchangeable with Super UDT2 fluids
- Provides high performance protection even at high operating temperatures
- Meets Kubota's stringent specifications
| Product Codes | Container Sizes Available |
|---|---|
| 70000-20000 | 12/1 Quart |
| 70000-20001 | 4/1 Gallon |
| 70000-20002 | 2/2.5 Gallon |
| 70000-20005 | 5 Gallon Pail |
| 70000-20055 | 55 Gallon Drum |
| 70000-20033 | 325 Gallon Tote |
Kubota Excavator Hydraulic Oils
Kubota Excavator Hydraulic Oils are uniquely formulated and designed to meet the stressful requirements of Kubota’s Excavators. This product offers the following benefits to Kubota equipment:
- The high viscosity provides consistent performance throughout the entire system, where temperatures may vary widely
- Superior corrosion resistance keeps machine parts clean and free of corrosion
- Excellent anti-foaming properties guard against cavitation of pumps and loss of hydraulic pressure
- Better oxidation resistance fights sludge and prolongs the fluid’s useful life
- Compatible with other hydraulic oils brands, so there is no need to change the entire system to start using the Kubota’s Hydraulic Oil
- Provides high performance protection for your excavators
- Meets Kubota's stringent specifications
| Product Codes | Container Sizes Available |
|---|---|
| 70000-68720 | 5 Gallon Pail of ISO VG32 |
| 70000-68740 | 55 Gallon Drum of ISO VG32 |
| 70000-68760 | 5 Gallon Pail of ISO VG46 |
| 70000-68780 | 55 Gallon Drum of ISO VG46 |
kubota tractor Hydraulic Fluid
Kubota Heavy Duty Engine Oils are engineered to meet the most demanding lubrication requirements of today's naturally aspirated, turbocharged and supercharged diesel fueled engines, including engines with cooled exhaust gas re-circulation (EGR). They are formulated with advanced additive technology, ( including foam control and soot dispersancy additives.) The engine oils provide and premium quality base stocks to protect engines against undesirable deposits, corrosion, deposits, oxidation, wear, and viscosity and thermal breakdown under severe service conditions. They meet the highest API (American Petroleum Institute) Service Categories for modern low emission diesel engines. These oils can also be used in transmission, hydraulic systems and other industrial applications where the manufacturer recommends the use of an engine oil.
Typical Properties
| 15W40 | 10W-30 | 30 | |
|---|---|---|---|
| Gravity, degree API | 29.5 | 31.1 | 29.7 |
| Viscosity @ 40 C, cSt | 117 | 80 | 86.89 |
| Viscosity @ 100 C, cSt | 15.2 | 11.9 | 11 |
| Viscosity Index | 135 | 143 | 113 |
| CCS Viscosity @ -25 C, cP | - - - - | 6600 | - - - - |
| CCS Viscosity @ -20 C, cP | 6600 | - - - - | - - - - |
| HTHS Viscosity, cP | 4.2 | 3.5 | 3.7 |
| Borderline Pumping Viscosity | Pass | Pass | - - - - |
| Pour Point, deg. C | -27 | -33 | -24 |
| Total Base Number (D-2896) | 9 | 10 | 7 |
| Sulfated Ash, % | 1 | 1 | 0.8 |
| Zinc, wt % | 0.13 | 0.13 | 0.13 |
Performance
| 10W-30 | 30 | 15W40 | |
|---|---|---|---|
| API CJ-4/CI-4/CI-4 Plus/CH-4/ | X | X | |
| CG-4/CF-4 | |||
| API CF-2/CF | X | ||
| API SL/SJ/SH/SG | X | X | |
| API SF | X | X | X* |
| CATERPILLAR | X# | X# | X |
| CUMMINS (CES 20081) | X## | ||
| DETROIT DIESEL | X | ||
| NAVISTAR | X | X |
*Meets requirements
#Meets proposed Caterpillar ECF-1Specification Requirements ##Meets the engine performance requirements of CES 20078
Product Codes and Container Sizes Available
| 15W-40 | 10W-30 | SAE30 | |
|---|---|---|---|
| 12/1 Quart | 70000-10000 | 70000-10200 | 70000-10100 |
| 4/1 Gallon | 70000-10001 | 70000-10201 | 70000-10101 |
| 2/2.5 Gallon | 70000-10002 | 70000-10202 | Not Available |
| 5 Gallon Pail | 70000-10005 | 70000-10205 | Available |
| 55 Gallon Drum | 70000-10055 | 70000-10255 | 70000-10155 |
| 275 Gallon Tote | 70000-10033 | 70000-10233 | Available |
Kubota Gear Oil
Kubota Gear Oils are superior sulfur-phosphorus, extreme pressure gear lubricants formulated with premium quality base stocks to meet the demands for excellent performance. They are designed to provide excellent load carrying capacity, extreme pressure properties, anti-foam performance, demulsibility, corrosion protection, thermal stability protection and service fill limited slip capability. These products are recommended for conventional rear axles, limited slip rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque, and high horsepower conditions. Kubota Gear Oils meet or exceed: Ford M2C108C; Mack GO-H, GO-H, & GO-J; Mil-L-2105E; API Services GL-5, GL-4.
Typical Properties
| SAE 80W-90 | SAE 85W-140 | |
|---|---|---|
| Vis @ 100 C (cSt) | 14.5 | 26.7 |
| Vis @ 40 C (cSt) | 141 | 361 |
| Viscosity Index | 98 | 99 |
| Spec Gravity @ 60F | 0.9 | 0.904 |
| Density (lbs/gal) | 7.49 | 7.53 |
| Brookfield Vis., Cp | 117,000(-26C) | 100,000(-15C) |
| Pour Point, C | -27 | -15 |
Performance
| SAE 80W-90 | SAE 85W-140 | |
|---|---|---|
| MIL-L-2105E | X | X |
| API GL-4 | X | X |
| API GL-5 | X | X |
Product Codes and Container Sizes Available (SAE 80W-90)
| 5 Gallon | 70000-10500 |
| 55 Gallon | 70000-10502 |